Private Login Server

image · #1 03-29-2009, 05:56 PM

Hi Everyone,

I have been having a few people test this and I have gotten positive results so far so I figure there is no reason not to let others try it.

I have made a new build (Private Login) which will allow unlimited users and a max of 3 worlds (like the minilogin setup was). This version requires Internet access to have the unlimited users enabled, but only has to check once every 6 hours (So far the testers have not seen any issues with the stats server going down and any disruption with their LS).

This is an individual login server and they run independent databases, so yes this is a downside but at least its an alternative. Stats will be uploaded to http://eqemu.devnoob.com/register/status.php

If you have any questions please let me know.

Without further babbling...

http://eqemu.devnoob.com/downloads/PrivateLogin.zip

Yeormom · #2 03-29-2009, 06:03 PM

I just called the fire department because my insurance does not cover the fire damage which is about to occur.

**trevius** · #3 03-29-2009, 06:10 PM

Quote:

Originally Posted by Yeormom

I just called the fire department because my insurance does not cover the fire damage which is about to occur.

LOL Yeormom, I personally don't see why anyone (including the emu team) would have an issue with this. The only thing that people had disagreements about was the secondary Public LS. With this option, it makes that secondary Public LS obsolete. There was never anything negative said about the Private LS released by Image as far as I know.

Image,

Thanks for providing an unrestricted version of the Private LS you created

This is a nice option for all servers to have available to them. I think this has alot of potential to really make a positive impact on the project. And, I am very sure that many people will be very glad to see this. I bet AX just peed his pants when he read this thread :P

thizzking916 · #4 03-29-2009, 07:42 PM

so whats the deal with this, does the operator of the server have to put theirs up, or does the user of the private login choose 3 servers it can connect to?

**trevius** · #5 03-29-2009, 07:47 PM

The server admin would setup their server to use this and players would edit their eqhost.txt file to point to that particular server's Private LS. Having a limit of 3 servers per private LS would give a few servers the option to share a single LS if they wanted. This would be useful for servers like SoA that have their normal server and also a progression server that they run as well as their test server. No reason to have each on it's own private LS, so they could set them all up to use the one.

HurtinuDaily · #6 03-29-2009, 07:56 PM

Guessing no source?? )

redghosthunter · #7 03-29-2009, 08:56 PM

mmmm, can someone hold my hand? I'm not a IT guy. After i download can u give me a step by step?

Aldest · #8 04-03-2009, 07:33 PM

And a new question.

When using PEQ you run a single file that launches minilogin, world and zone. I can get my server working just fine by doing that manually.

Now, PEQ launches zone and world will load as many zones as I tell the DB to. With me doing it separate I have to launch zone over and over again. One per zone. How do I get "X zones in one window?"

neiv2 · #9 04-03-2009, 08:20 PM

Thanks Aldest, but those settings were already there, and it continues to fail to hit the character screen. It's frustrating to say the least. So close, but no cigar.

neiv2 · #10 04-03-2009, 09:31 PM

Aldest, would you mind posting the contents of your eqemu_config.xml file please?

Aldest · #11 04-04-2009, 09:32 AM

Not at all. Here you are:

Quote:

<?xml version="1.0">
<server>
<world>
<shortname>shadowrealm</shortname>
<longname>Shadow Realm</longname>


<address>5.2.52.138</address>
<localaddress>5.2.52.138</localaddress>


<loginserver>
<host>5.2.52.138</host>
<port>5999</port>
<account>xxxx</account>
<password>xxxx</password>
</loginserver>


<key>some long random string</key>


<http port="9080" enabled="true" mimefile="mime.types" />
</world>


<database>
<host>localhost</host>
<port>3306</port>
<username>xxxx</username>
<password>xxxx</password>
<db>xxxx</db>
</database>
</server>

neiv2 · #12 04-04-2009, 10:45 AM

Can you elaborate on your host? <host>5.2.52.138</host>

Is this a static IP address? All the instructions I have seen specify the use of 127.0.0.1 as the host.