Dual/Quad Core CPU Fixes

[vales]

Would just like to add that in Vista, you do not need any of these hotfixes or driver updates. They come natively installed in Vista (32 and 64 bit) right out of the box.

You will, however, need to set the CPU Affinity to a single core if you're using the Titanium client.

If you are using the Secrets of Faydwer client, then you do not need to do any of this as support for multi-core CPUs work right off the bat. Just install the game, edit the eqhost file, add the patchme at the end of the shortcut and launch the game. Works very smooth and no issues with it what so ever. I use my Titanium verson as a coaster now.

[So_1337]

You know, that right there is reason enough for me to buy the SoF client. Thank you very much for the information =)

[Isak922]

Having issues with my new computer... I can't even get to the login screen; never mind on a server!

The specs of my computer are as follows:
Intel Pentium D 940, 3.2GHz Dual Core
3.5GB of DDR2 (PC5400)
BFG Nvidia GeForce 9800GT with 1GB of DDR3 RAM, overclocked from the factory
2x 250GB HDD's
Fully updated Windows XP, albeit the Media Center Edition, not Pro.


I install a fresh copy of EQ Titanium (Tried on multiple sets of disks), I change the eqhost file to have "Host=eqemulator.net:5998" and the shortcut from eqgame.exe to have the " patch me" at the end.

When booting up the game, I get an error stating the following:

"eqgame.exe has encountered a problem and needs to close. We are sorry for the inconvenience.
If you were in the middle of something, the information you were working on might be lost"

With options to Debug or Close... Debugging does nothing, other than close the window.

The Emu server runs great on my older comp, an old eMachines T3256 with an AMD 3200+ (2.2GHz single core), 2gb of PC2700, and a Nvidia 7600GS (512mb of DDR3). XP SP3 (Pro) for the OS.

Any suggestions on getting me up and running?

[teews08]

My specs are pretty similar to yours. I also was experiencing the problem and was able to fix it by doing this:
1. Right click eqgame.exe
2. Select "Properties"
3. Go to the "Compatabilty" tab.
4. Check the box next to "Run in 640 x 480 screen resolution"
5. Hit "Apply" and "Close" and your done.

Start up eq again and hopefully that will fix it. You will have to change your resolution in game, but other than that everything runs fine. Good Luck, hope this helps.

Aeonite

[Bellos]

so if we get secrets of fawdwayer (sp) eq emu will work again?

[vales]

EQEmu has always worked.

I just installed the Titanium client again, and it works perfectly fine (aside from small flickers - but I blame SLi for that). SoF worked fine with no issues since I'm assuming the client version is more optimized for recent hardware. Since the Titanium client can't be patched, it has it's flaws. But you get more functionality out of playing. SoF is getting there, but there's still some work needed. I'm sure given the time, the SoF client will surpass Titanium since there a lot more information to get from it plus better client support right out of the box.


But to answer your question, I would just get Secrets of Faydwer since Titanium is very difficult to find. You can get both for under 10 dollars if you're lucky. If you don't get it now, you may never be able to since they will be releasing it via digital download from now on. SoF is the last client you will be able to buy as far as retail releases go for EverQuest. It's only 5 DOLLARS with FREE shipping via newegg.com.


Just think of it as this:

1.) Titanium has more playability, but is difficult to find a retail copy since SoF pretty much replaced it. Supports older hardware just fine, but newer hardware may have some issues.

2.) Secrets of Faydwer client is more optimized for newer hardware but lacks in functionalty as far as playing goes. Think of it as the Titanium client when it was first supported. Lots of OPCodes still need to be coded in, and some may encounter bugs with skills, spells, etc. It's minor though, and completely worth it. Some older zones have been completely replaced, so zoning may cause some issues.


So I'll post this just so everyone understands.

1.) If you're using Vista, you DO NOT need to install the Dual Core patches for AMD CPUs. Vista already has them installed.
2.) If you're using Vista and a Dual/Quad Core CPU, Titianium and SoF work right out of the box. No need to change the affinity for the CPU.


For the record, I'm running SoF and Titanium clients on Vista64 perfectly fine. No CPU patches or affinity switching.


Although I can't say if it's specifically a Vista64 thing, I still see people having issues with the game running fast, etc. Assuming that they're NOT using Vista32 or 64-bit, that might be the issue. I'm not saying to go out and switch to Vista (especially since Windows 7 is right around the corner), but if you're running Windows XP, you're going to have to work a little harder to get things to run fine.

Windows XP is at the end of it's life expectancy anyways and was supposed to be phased out by Vista, but since people are pretty vehement to upgrade their hardware, they stuck with XP. XP support will be completely gone by 2014, and Vista retail will be phased out starting in 2011 - being replaced by the much better Windows 7.

Whatever the case, it doesn't matter anyway since the world is ending in 2012.

[pfyon]

Alright I'm about at wits end trying to get my client connected without the stuttering.

I've been having the symptoms similar to the ones posted in this thread, the client running perfectly for a few seconds then freezing everything (client, mouse, other windows) for 10-30s. The char select screen runs just fine, but I assume that's because it's newer code and programmed for multicore processors (maybe?).

I should note that mobs aren't agroing even though they're kos, and I assume this is because the maps on the server are different than the client, but that shouldn't effect anything else than the eq client right?

The system:

Asus M2N-SLI Deluxe
AMD Athlon 64 X2 4200+ (2 cores @ 2.2GHz)
2 x 1GB DDR2 Corsair @ 333MHz
NVidia GeForce 7600 GS
WinXP Pro SP3

Things I have tried that have not worked:
- Used Process Explorer to force affinity for 1 core.
- Updated directX (was already 9.0c, but apparently there was an update available)
- Updated video drivers
- Installed the AMD Dual Core Optimizer
- Disabled Cool'N'Quiet by setting power settings as above
- Played with the maxFPS directive in eqclient.ini (set anywhere from 10 to 5000 fps)
- Installed most of the other updates though windows update (not all, one nvidia network one caused permanent bluescreens on bootup)

Updating the CPU drivers (from 1.2.something to 1.3.2) seemed to have a small effect. Instead of getting one frame every 30s or so, I would get one every 15-20s.

Does anyone have any suggestions or a similar situation where they managed to fix it?

[cubber]

This works on gentoo linux using SoF or Titanium client under wine 1.1.12, and will probably work fine for all other linux distros and wine versions.

create a file called start in your eq installation directory.

The contents of the file should look like this:

taskset -c 0 wine eqgame.exe patchme

This will bind the process to your first CPU (CPU0)

make sure you set the file as executable by running:

 chmod +x start

then run it with

 ./start

to start the game.

[majorheadache]

I had the same problem when I first tried to join about a week ago now, and reloaded EQ 3x thinking it was definately just an install issue. The one thing that many of us returning to EQ1 from a comfortable run on say Vangaurd, is the resolution capabilities!! My main (middle) LCD is a 24" and even my desktop used to be run 1920x1200, this same issue would happen until I lower resolution on my desktop to 1280x960. Clicked on my new EQemu shortcut icon on the desktop, and presto!! After all the reloading and updates on everything you caould imagine, it was aggrevating that I overlooked the little stuff..... and I make a living as a Networking Engineer for a major ISP/Phone Company..... we strive on starting the troubleshooting at "Layer 1". Leave it to me to bypass the 'rules of the road' on my own gaming PC.

Major Headache
- another nOOb returns to ye ole best original MMORPG !

PS - Great work from what I have seen so far! Excited to have been turned onto this recently.

[majorheadache]

^^^^ Sorry this was meant to be a direct reply to Issac922's post on the 1st page of this thread... i didn't realize there was a 2nd page yet

[Bellos]

Hey, i cannot play on my new pc, it is hardware related and i cannot fix it. I get disconnected no matter what. Do you think linux will run it if i cant on XP

Im gonna be installing a version of ubunto(sp) linux i got. I may try it out, i miss playing EQ 1 SOOOOOOOOOOOOOOOOOO MUCH!!!

[Bellos]

Originally Posted by Bellos

Hey, i cannot play on my new pc, it is hardware related and i cannot fix it. I get disconnected no matter what. Do you think linux will run it if i cant on XP

Im gonna be installing a version of ubunto(sp) linux i got. I may try it out, i miss playing EQ 1 SOOOOOOOOOOOOOOOOOO MUCH!!!

Oh just for info. I just did a fresh install of xp pro and of EQ titanium. No go. Im downloading SP 3 at the moment. I tried setting affinity it doesnt work. I tried compadibility mode, doesnt work either. I I get disconnected anytime i try to connect to a server. Do i have to disable execute disable bit in my bios or somthing. Im using Asus p5q pro, intel e8600 cpu and new ram. I dont know what else it could be, its driving me mad... lol i have no money atm to get the new expansion atm whos to say it would even work either. Oh well if anyone has a similar system and can play lemme know.

Also is it possible my ISP is blocking ports on their end? Or My IP address was globally banned from all servers?

[Tsuken]

when I put this in the target box:
c:\windows\system32\cmd.exe /C start /affinity 1 eqgame.exe patchme

Nothing happens. Everquest doesn't start at all. The cmd window blinks for a split second, but then nothing.

I'm using windows xp.

[trevius]

I think that option may only work for Windows Vista or later. You will probably need to try one of the other fixes like updating to SP3 and using the AMD Optimizer if your CPU is AMD.

[Tesi]

ONLY DO THIS IF YOU TRY EVERYTHING ELSE ON THIS PAGE !!! i dont wanna be responsible for your mistake if u do it wrong



After a YEAR of not playing because of a 8 core AMD processor ... I try Every fix known to man kind ( everything i could find on this page also ) ... to stop my game from "running to fast" nothing worked at all .. Then TODAY about 30 minutes ago .. i found somthing DIFFRENT that i never tried .. so i said what the hell ... why not give it a shot ... and now i can play again .. it requires NO Download .. NO jerking with game files none of that .. What i did was go into My BIOS by hitting Delete on boot up ..

Gigabyte BIOS w/AMD:

Default Bios settings:
BCLK Clock Control : Auto (200 MHz, but needed hard-set)
CPU Clock Ratio: 22.00
Core Preformance Boost: Auto
CPB Ratio: 23.50
Cool & Quiet: Enabled


Changed to:
BCLK Clock Control : 200.00 MHz
CPU Clock Ratio: 21.00 (down clock CPU Frequency to 4.20GHz)
Core Preformance Boost: Disabled
CPB Ratio: Greyed out (disabled by above setting)
Cool & Quiet: Disabled


:-NOW i can play EQ again !!! so stoked ..

i diddent want to put any links on here as to were i found this info but ill put one at the end of the page cuz i HATE clicking links and dont trust them so i just put down what i did .. but for anyone who wants to know were i got my info from check out this OFFICAL EQ thred

the change I did is on this page :
https://forums.daybreakgames.com/eq/...cessor.218770/

and the page that linked me to that page is on this page:
https://forums.daybreakgames.com/eq/...md-cpu.218965/

NOW the DISCLAIMER .... i have about 30 other games on my computer also that i have not tested out sence i made this change .. so i may need to find a Program that will apply the settings i want only when i launch eqgame.exe


Another Disclaimer ... IGNORE any bad spelling im a MATH brain and a Aviation Electronics Technician tell me to build a F22 Raptor ( i have done by the way) im on it ... tell me to enter a spelling B ..... well .......